Baseballer8
26th June 2005, 05:36 PM
This is a thread which its sole purpose it to discuss and debate the merits of using outside items in out PE. These forums have been traditionally against the use of devices but I think they are something which can help the determined PE'er. I no way will this thread be used to advertise, meaning that all the "devices" and suggestions are things which can be made from scratch or are items which have common household use. Now that that is out of the way let the fun begin.
First suggestion is for people doing stretches wrap the cock once or twice with toilet paper as to obtain a better grip.
With many assisted PE devices it is necessary to wrap the penis with a material to secure and protect it. Some wraps used are medical gauze, Thermawrap insulation, swin caps cut up, and whatever you think would work for you kinda like selecting a lube use what works.
Assisted holds (aka clamping) - In my PE journey I have found holds to be the best exercise for girth period, though I found that my hand was limiting my gains. The hand is bulky and tires easily so in reality it only allows a decent hold from about an inch and one half up the shaft for about 30 sec to a minute. Effective - yes, Perfect-no. I decided to use a thick gauge string one day because I had a broken thumb (whole nother story) and couldn't grip my cock. I found using an overhand knot with the penis placed in the loop you could get a great hold at the very base of your penis and it could be held for as long as you pleased and it was very easy to just kegal more blood in as the string restricted mor blood than your hand could. While surfing the net I came across another great idea which was later deemed clamping. It involves the same principles as the string but rather this time you use the cable clamps for hoses (how ironic hoses = penis oh well sorry :lol: :roll: ) These are easily bought at your local hardware store and are oval shaped which helps for a better fit. Make sure they are reversable and reusable.
Hanging - Many people are wondering about hanging but all they have seen are the negative results of a hurt stringy cock, but this is a worst case scenario gone wrong. Hanging has produced benefits for all sorts of people though common sense is needed along with and understanding of your body. You need to know the difference between a stretch and pain. Never hang with pain. There are many hanging devises out there, but they fetch normally greater than $100 so that is a major turnoff to many people, but there is good news because it is easy to make your own hanging device. Although it won't look as professional it will work and who cares because you will be to only one to see it. The simplest makeshift hanging device to make costs about $7. To make it you will need a cable clamp, thin rope, and a thick rag. 1) Take the rag and cover the penis and try to make it thick and tight, mark off where the end of the rag is. Now put three to four holes in the rag where the tag end is and thread the rope through it then tie it off. All in all your rag should look like it was folded over once or twice and then wrapped lengthwise on the cock with the thread end on top. Now attach cable clamp so that the pressure is pulling on the inner penis and not just the skin. You attach the weights at the end of the string.
2) The second and more secure hanging device you can create is modeled after a popular one which sells for $100+. This device is more secure than the cloth rag model but also requires more labor but once all parts have been collected it should only take a few minutes to cut everything and fit. What you need : An S hook, 2 inch section of 1.25" nylon braided hose, 3 inch section of 1.5"-1.75" nylon braided hose, and a cable clamp. Instructions 1) split both pieces of hose opening them up. 2) Lay flat the 1.25" section then cut a V .5" wide and .5 deep this is where the head of the penis will protrude so you may want to round the edges. 3) Lay the 1.5-1.75" section flat and cut the hose from the 2" mark to the 3" mark to form a trapazoid top to it and use a drill to put a hole big enough for your S hook to fit into in the middle of the trapezoid. This is where you will put you hook and weights. To assemble for use first wrap your penis with Thermawrap or medical gauze then place the 1.25" section over your penis with the V at the head and the slit facing the bottom. Then place the 1.5-1.75" section on the bottom slit facing up and clamp them together using the cable clamp, now you are ready
The nylon braided hose is used because it is rigid and semi flexible allowing a more uniform compression so shy away from using flimsy tubing. Also there are some differences people use in this system and one of them is using metal hose clamps instead of cable clamps. Personally I think this to be a stupid idea unless you are absolutely sure of what you are doing because you will not be able to quickly take it off if something goes wrong. Again this may be an alternative form of PE but safety is still critical.
ADS - Another school of thought in PE is a continueous stimulus on the penis to encourage it to grow. This is also know as All Day Stretching. The idea is that if the penis is stretched for several hours a day, even up to twelve hours, it will slowly elongate. There are risks involved in this form of PE also. If the penis is constanly being stretched then there is a chance of blood being pooled in the head and causing tissue death from oxygen deprivation. This is why at least every 15 minutes the device is taken off and and blood is recirculated. To make you own ADS system is easy. All you need is a large O ring, a strap with clip connector kinda like what you use in luggage or camping gear, and a nut for a screw. You put the strap through the O ring then put the nut over the O ring. The strap is then tightened comfortably around the leg and then the penis is put in the noose created by the end of the O ring and the nut and tightened so that it holds but doesn't cut off circulation. It is then worn for however long the user desires.
If you wish to have an ADS which is stronger and pulls more weight then you will need a cable clamp, a drill, bunji cord (like for securing luggage or stuff in the back of a truck, a rag and the same slip together strap from the last ADS. To assemble you first drill two holes through the cable clamp on opposite sides which are big enough for you to pass the hook of the bungie cord. Now wrap your cock with the soft rag or cloth and then clamp it, where it will hold but not where it will cut off circulation. Put the strap on below your knee then run the bungie cord through and hook it up.
With hanging and ADS if you ever feel pain then stop something is wrong. Also make sure you keep good circulation for healing and oxygen purposes. With many of these clamp devices you will notice the head getting very pumped up so you will periodically need to squeeze and drain it. This will also help with circulation. If anything ever turns blue or dark purple you will need to stop because you are about to kill your dick. If in the case it turns black take any and all devices off and run it under hot water or you risk losing your dick. If you pay attention this will never be a problem but there have been times when people have been stupid, so it is something which needs to be addressed.
People sometimes even use devices to help them stretch with their hands so it is a form of a stretching aid but these have so many uses in PE. The next device which I will describe is the Improved Wench, which is my version of a great invention from another forum. It is used as a hanging device, ADS, and stretching aider.
To make this device you will need a little more than a 10 inch section of 2" wide industrial strength velcro (it must be industrial) with sticky back, a Dr. Shoals footpad or similar product, 1-3ft of 1" wide nylon strap, paint stirring sticks from Home depot and a cable clamp. Pull off the covering to the sticky velcro and carefully put a soft side onto a hard side, so this creates a ten inch strip of two sided velcro. Next take the foot pad and cut out two 1"x2" pieces now take some of the paint sticks and fit these on the back till you have a thickness of about 1/4 inch. Now fit some hard velcro to the back of these and round the corners for comfort. Next take the nylon strap which you bought and cut it to one ten inch length and one 36 inch length. Take some soft velcro cut to 1" x 2" and take the back off exposing the sticky side and put on the ends of the nylon strap. Now take the 10" band and lay it flat with the soft side up one inch from the end put the first gripper vertically so it fits from top to bottomand press firmly on it, place the second one 1.5 -2" from edge to edge. The goal is that once it is wrapped around the penis it puts pressure on the side away from the nerves. Now take the straps and place the soft velcro on the hard part of the band directly behind the pads. Wrap it tightly around the penis with the pads on the side of the penis, then put the cable clamp around the whole thing. From this you are able to hang or stretch. The shorter band 1ft is for hanging, and the longer band is for stretching, using your legs is a great way to really put some stretching pressure. For an ADS you just need to wrap it tightly and use the bunji cord previously mentioned. A couple of suggestions though 1) Really rough up the velcro so that it is really pliable or your first couple of experiences will be less than favorable. Also if you want you can groove the pads for better blood flow. The nice part of this device is that since it only grips the sides of the penis it helps with the blood flow and allows you to wear it for a longer period of time once you find the right pad positioning and wrap tension. I chose the shoe soles because I thought they would be better than the original material used and possibly so it can be worn without a wrap but that is for each particular user to decide.
Next is a homemade traction device :D
Bear with me guys this is a work in progress and is hard to describe these contraptions without posting pictures. Pictures will be posted when I make some of them and who knows when that will be with my schedule as it is, volunteers apprieciated. Again more to come once I get more time :cool
First suggestion is for people doing stretches wrap the cock once or twice with toilet paper as to obtain a better grip.
With many assisted PE devices it is necessary to wrap the penis with a material to secure and protect it. Some wraps used are medical gauze, Thermawrap insulation, swin caps cut up, and whatever you think would work for you kinda like selecting a lube use what works.
Assisted holds (aka clamping) - In my PE journey I have found holds to be the best exercise for girth period, though I found that my hand was limiting my gains. The hand is bulky and tires easily so in reality it only allows a decent hold from about an inch and one half up the shaft for about 30 sec to a minute. Effective - yes, Perfect-no. I decided to use a thick gauge string one day because I had a broken thumb (whole nother story) and couldn't grip my cock. I found using an overhand knot with the penis placed in the loop you could get a great hold at the very base of your penis and it could be held for as long as you pleased and it was very easy to just kegal more blood in as the string restricted mor blood than your hand could. While surfing the net I came across another great idea which was later deemed clamping. It involves the same principles as the string but rather this time you use the cable clamps for hoses (how ironic hoses = penis oh well sorry :lol: :roll: ) These are easily bought at your local hardware store and are oval shaped which helps for a better fit. Make sure they are reversable and reusable.
Hanging - Many people are wondering about hanging but all they have seen are the negative results of a hurt stringy cock, but this is a worst case scenario gone wrong. Hanging has produced benefits for all sorts of people though common sense is needed along with and understanding of your body. You need to know the difference between a stretch and pain. Never hang with pain. There are many hanging devises out there, but they fetch normally greater than $100 so that is a major turnoff to many people, but there is good news because it is easy to make your own hanging device. Although it won't look as professional it will work and who cares because you will be to only one to see it. The simplest makeshift hanging device to make costs about $7. To make it you will need a cable clamp, thin rope, and a thick rag. 1) Take the rag and cover the penis and try to make it thick and tight, mark off where the end of the rag is. Now put three to four holes in the rag where the tag end is and thread the rope through it then tie it off. All in all your rag should look like it was folded over once or twice and then wrapped lengthwise on the cock with the thread end on top. Now attach cable clamp so that the pressure is pulling on the inner penis and not just the skin. You attach the weights at the end of the string.
2) The second and more secure hanging device you can create is modeled after a popular one which sells for $100+. This device is more secure than the cloth rag model but also requires more labor but once all parts have been collected it should only take a few minutes to cut everything and fit. What you need : An S hook, 2 inch section of 1.25" nylon braided hose, 3 inch section of 1.5"-1.75" nylon braided hose, and a cable clamp. Instructions 1) split both pieces of hose opening them up. 2) Lay flat the 1.25" section then cut a V .5" wide and .5 deep this is where the head of the penis will protrude so you may want to round the edges. 3) Lay the 1.5-1.75" section flat and cut the hose from the 2" mark to the 3" mark to form a trapazoid top to it and use a drill to put a hole big enough for your S hook to fit into in the middle of the trapezoid. This is where you will put you hook and weights. To assemble for use first wrap your penis with Thermawrap or medical gauze then place the 1.25" section over your penis with the V at the head and the slit facing the bottom. Then place the 1.5-1.75" section on the bottom slit facing up and clamp them together using the cable clamp, now you are ready
The nylon braided hose is used because it is rigid and semi flexible allowing a more uniform compression so shy away from using flimsy tubing. Also there are some differences people use in this system and one of them is using metal hose clamps instead of cable clamps. Personally I think this to be a stupid idea unless you are absolutely sure of what you are doing because you will not be able to quickly take it off if something goes wrong. Again this may be an alternative form of PE but safety is still critical.
ADS - Another school of thought in PE is a continueous stimulus on the penis to encourage it to grow. This is also know as All Day Stretching. The idea is that if the penis is stretched for several hours a day, even up to twelve hours, it will slowly elongate. There are risks involved in this form of PE also. If the penis is constanly being stretched then there is a chance of blood being pooled in the head and causing tissue death from oxygen deprivation. This is why at least every 15 minutes the device is taken off and and blood is recirculated. To make you own ADS system is easy. All you need is a large O ring, a strap with clip connector kinda like what you use in luggage or camping gear, and a nut for a screw. You put the strap through the O ring then put the nut over the O ring. The strap is then tightened comfortably around the leg and then the penis is put in the noose created by the end of the O ring and the nut and tightened so that it holds but doesn't cut off circulation. It is then worn for however long the user desires.
If you wish to have an ADS which is stronger and pulls more weight then you will need a cable clamp, a drill, bunji cord (like for securing luggage or stuff in the back of a truck, a rag and the same slip together strap from the last ADS. To assemble you first drill two holes through the cable clamp on opposite sides which are big enough for you to pass the hook of the bungie cord. Now wrap your cock with the soft rag or cloth and then clamp it, where it will hold but not where it will cut off circulation. Put the strap on below your knee then run the bungie cord through and hook it up.
With hanging and ADS if you ever feel pain then stop something is wrong. Also make sure you keep good circulation for healing and oxygen purposes. With many of these clamp devices you will notice the head getting very pumped up so you will periodically need to squeeze and drain it. This will also help with circulation. If anything ever turns blue or dark purple you will need to stop because you are about to kill your dick. If in the case it turns black take any and all devices off and run it under hot water or you risk losing your dick. If you pay attention this will never be a problem but there have been times when people have been stupid, so it is something which needs to be addressed.
People sometimes even use devices to help them stretch with their hands so it is a form of a stretching aid but these have so many uses in PE. The next device which I will describe is the Improved Wench, which is my version of a great invention from another forum. It is used as a hanging device, ADS, and stretching aider.
To make this device you will need a little more than a 10 inch section of 2" wide industrial strength velcro (it must be industrial) with sticky back, a Dr. Shoals footpad or similar product, 1-3ft of 1" wide nylon strap, paint stirring sticks from Home depot and a cable clamp. Pull off the covering to the sticky velcro and carefully put a soft side onto a hard side, so this creates a ten inch strip of two sided velcro. Next take the foot pad and cut out two 1"x2" pieces now take some of the paint sticks and fit these on the back till you have a thickness of about 1/4 inch. Now fit some hard velcro to the back of these and round the corners for comfort. Next take the nylon strap which you bought and cut it to one ten inch length and one 36 inch length. Take some soft velcro cut to 1" x 2" and take the back off exposing the sticky side and put on the ends of the nylon strap. Now take the 10" band and lay it flat with the soft side up one inch from the end put the first gripper vertically so it fits from top to bottomand press firmly on it, place the second one 1.5 -2" from edge to edge. The goal is that once it is wrapped around the penis it puts pressure on the side away from the nerves. Now take the straps and place the soft velcro on the hard part of the band directly behind the pads. Wrap it tightly around the penis with the pads on the side of the penis, then put the cable clamp around the whole thing. From this you are able to hang or stretch. The shorter band 1ft is for hanging, and the longer band is for stretching, using your legs is a great way to really put some stretching pressure. For an ADS you just need to wrap it tightly and use the bunji cord previously mentioned. A couple of suggestions though 1) Really rough up the velcro so that it is really pliable or your first couple of experiences will be less than favorable. Also if you want you can groove the pads for better blood flow. The nice part of this device is that since it only grips the sides of the penis it helps with the blood flow and allows you to wear it for a longer period of time once you find the right pad positioning and wrap tension. I chose the shoe soles because I thought they would be better than the original material used and possibly so it can be worn without a wrap but that is for each particular user to decide.
Next is a homemade traction device :D
Bear with me guys this is a work in progress and is hard to describe these contraptions without posting pictures. Pictures will be posted when I make some of them and who knows when that will be with my schedule as it is, volunteers apprieciated. Again more to come once I get more time :cool